upload android base code part3

android/bootable/recovery/minui/graphics_fbdev.cpp

@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "graphics_fbdev.h"
+
+#include <fcntl.h>
+#include <linux/fb.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "minui/minui.h"
+
+MinuiBackendFbdev::MinuiBackendFbdev() : gr_draw(nullptr), fb_fd(-1) {}
+
+void MinuiBackendFbdev::Blank(bool blank) {
+  int ret = ioctl(fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK);
+  if (ret < 0) perror("ioctl(): blank");
+}
+
+void MinuiBackendFbdev::SetDisplayedFramebuffer(unsigned n) {
+  if (n > 1 || !double_buffered) return;
+
+  vi.yres_virtual = gr_framebuffer[0].height * 2;
+  vi.yoffset = n * gr_framebuffer[0].height;
+  vi.bits_per_pixel = gr_framebuffer[0].pixel_bytes * 8;
+  if (ioctl(fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) {
+    perror("active fb swap failed");
+  }
+  displayed_buffer = n;
+}
+
+GRSurface* MinuiBackendFbdev::Init() {
+  int fd = open("/dev/graphics/fb0", O_RDWR);
+  if (fd == -1) {
+    perror("cannot open fb0");
+    return nullptr;
+  }
+
+  fb_fix_screeninfo fi;
+  if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) {
+    perror("failed to get fb0 info");
+    close(fd);
+    return nullptr;
+  }
+
+  if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) {
+    perror("failed to get fb0 info");
+    close(fd);
+    return nullptr;
+  }
+
+  // We print this out for informational purposes only, but
+  // throughout we assume that the framebuffer device uses an RGBX
+  // pixel format.  This is the case for every development device I
+  // have access to.  For some of those devices (eg, hammerhead aka
+  // Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a
+  // different format (XBGR) but actually produces the correct
+  // results on the display when you write RGBX.
+  //
+  // If you have a device that actually *needs* another pixel format
+  // (ie, BGRX, or 565), patches welcome...
+
+  printf(
+      "fb0 reports (possibly inaccurate):\n"
+      "  vi.bits_per_pixel = %d\n"
+      "  vi.red.offset   = %3d   .length = %3d\n"
+      "  vi.green.offset = %3d   .length = %3d\n"
+      "  vi.blue.offset  = %3d   .length = %3d\n",
+      vi.bits_per_pixel, vi.red.offset, vi.red.length, vi.green.offset, vi.green.length,
+      vi.blue.offset, vi.blue.length);
+
+  void* bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+  if (bits == MAP_FAILED) {
+    perror("failed to mmap framebuffer");
+    close(fd);
+    return nullptr;
+  }
+
+  memset(bits, 0, fi.smem_len);
+
+  gr_framebuffer[0].width = vi.xres;
+  gr_framebuffer[0].height = vi.yres;
+  gr_framebuffer[0].row_bytes = fi.line_length;
+  gr_framebuffer[0].pixel_bytes = vi.bits_per_pixel / 8;
+  gr_framebuffer[0].data = static_cast<uint8_t*>(bits);
+  memset(gr_framebuffer[0].data, 0, gr_framebuffer[0].height * gr_framebuffer[0].row_bytes);
+
+  /* check if we can use double buffering */
+  if (vi.yres * fi.line_length * 2 <= fi.smem_len) {
+    double_buffered = true;
+
+    memcpy(gr_framebuffer + 1, gr_framebuffer, sizeof(GRSurface));
+    gr_framebuffer[1].data =
+        gr_framebuffer[0].data + gr_framebuffer[0].height * gr_framebuffer[0].row_bytes;
+
+    gr_draw = gr_framebuffer + 1;
+
+  } else {
+    double_buffered = false;
+
+    // Without double-buffering, we allocate RAM for a buffer to
+    // draw in, and then "flipping" the buffer consists of a
+    // memcpy from the buffer we allocated to the framebuffer.
+
+    gr_draw = static_cast<GRSurface*>(malloc(sizeof(GRSurface)));
+    memcpy(gr_draw, gr_framebuffer, sizeof(GRSurface));
+    gr_draw->data = static_cast<unsigned char*>(malloc(gr_draw->height * gr_draw->row_bytes));
+    if (!gr_draw->data) {
+      perror("failed to allocate in-memory surface");
+      return nullptr;
+    }
+  }
+
+  memset(gr_draw->data, 0, gr_draw->height * gr_draw->row_bytes);
+  fb_fd = fd;
+  SetDisplayedFramebuffer(0);
+
+  printf("framebuffer: %d (%d x %d)\n", fb_fd, gr_draw->width, gr_draw->height);
+
+  Blank(true);
+  Blank(false);
+
+  return gr_draw;
+}
+
+GRSurface* MinuiBackendFbdev::Flip() {
+  if (double_buffered) {
+    // Change gr_draw to point to the buffer currently displayed,
+    // then flip the driver so we're displaying the other buffer
+    // instead.
+    gr_draw = gr_framebuffer + displayed_buffer;
+    SetDisplayedFramebuffer(1 - displayed_buffer);
+  } else {
+    // Copy from the in-memory surface to the framebuffer.
+    memcpy(gr_framebuffer[0].data, gr_draw->data, gr_draw->height * gr_draw->row_bytes);
+  }
+  return gr_draw;
+}
+
+MinuiBackendFbdev::~MinuiBackendFbdev() {
+  close(fb_fd);
+  fb_fd = -1;
+
+  if (!double_buffered && gr_draw) {
+    free(gr_draw->data);
+    free(gr_draw);
+  }
+  gr_draw = nullptr;
+}