diff --git a/android/device/softwinner/tulip-m64/init.device.rc b/android/device/softwinner/tulip-m64/init.device.rc index 04ca1e590b..a4a7b2e43b 100755 --- a/android/device/softwinner/tulip-m64/init.device.rc +++ b/android/device/softwinner/tulip-m64/init.device.rc @@ -11,6 +11,8 @@ on boot write /proc/sys/vm/page-cluster 0 write /proc/sys/vm/swappiness 80 +# led + insmod /vendor/modules/leds-sunxi.ko #insmod gsensor module #insmod /vendor/modules/bma250.ko @@ -34,3 +36,6 @@ on property:sys.boot_completed=1 #insmod ir module insmod /vendor/modules/sunxi-ir-rx.ko insmod /vendor/modules/ir-nec-decoder.ko + +# 40pin + insmod /vendor/modules/gpio-sunxi.ko diff --git a/lichee/linux-4.9/arch/arm64/configs/sun50iw1p1smp_android_defconfig b/lichee/linux-4.9/arch/arm64/configs/sun50iw1p1smp_android_defconfig index daebe49d6c..ce85b625ab 100644 --- a/lichee/linux-4.9/arch/arm64/configs/sun50iw1p1smp_android_defconfig +++ b/lichee/linux-4.9/arch/arm64/configs/sun50iw1p1smp_android_defconfig @@ -1544,6 +1544,7 @@ CONFIG_BCMDHD=m CONFIG_BCMDHD_FW_PATH="/system/vendor/modules/fw_bcmdhd.bin" CONFIG_BCMDHD_NVRAM_PATH="/system/vendor/modules/nvram.txt" CONFIG_BCMDHD_SDIO=y +# CONFIG_BCMDHD_USB is not set CONFIG_BCMDHD_OOB=y # CONFIG_BCMDHD_SDIO_IRQ is not set CONFIG_RTL8723CS=m @@ -1970,7 +1971,7 @@ CONFIG_PINCTRL_SUN50IW1P1_R=y CONFIG_GPIOLIB=y CONFIG_OF_GPIO=y # CONFIG_DEBUG_GPIO is not set -# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC=y # @@ -1978,7 +1979,7 @@ CONFIG_GPIO_GENERIC=y # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set -# CONFIG_GPIO_SUNXI is not set +CONFIG_GPIO_SUNXI=m # CONFIG_GPIO_DWAPB is not set CONFIG_GPIO_GENERIC_PLATFORM=y # CONFIG_GPIO_GRGPIO is not set @@ -3135,22 +3136,6 @@ CONFIG_USB_CONFIGFS_F_MIDI=y # CONFIG_USB_CONFIGFS_F_HID is not set # CONFIG_USB_CONFIGFS_F_UVC is not set # CONFIG_USB_CONFIGFS_F_PRINTER is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set CONFIG_USB_SUNXI_USB=y CONFIG_USB_SUNXI_USB_MANAGER=y CONFIG_USB_SUNXI_USB_DEBUG=y @@ -3219,6 +3204,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_IS31FL319X is not set # CONFIG_LEDS_IS31FL32XX is not set +CONFIG_LEDS_SUNXI=m # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) @@ -3230,13 +3216,13 @@ CONFIG_LEDS_CLASS=y # LED Triggers # CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -# CONFIG_LEDS_TRIGGER_ONESHOT is not set -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_CPU is not set # CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) diff --git a/lichee/linux-4.9/drivers/gpio/gpio-sunxi.c b/lichee/linux-4.9/drivers/gpio/gpio-sunxi.c old mode 100644 new mode 100755 index 2817125e86..917e6ca3c8 --- a/lichee/linux-4.9/drivers/gpio/gpio-sunxi.c +++ b/lichee/linux-4.9/drivers/gpio/gpio-sunxi.c @@ -325,12 +325,21 @@ static int gpio_sw_resume(struct device *dev) return 0; } -static struct device_attribute gpio_sw_class_attrs[] = { - __ATTR(cfg, 0664, cfg_sel_show, cfg_sel_store), - __ATTR(pull, 0664, pull_show, pull_store), - __ATTR(drv, 0664, drv_level_show, drv_level_store), - __ATTR(data, 0664, data_show, data_store), - __ATTR_NULL, +static DEVICE_ATTR(cfg, 0664, cfg_sel_show, cfg_sel_store); +static DEVICE_ATTR(pull, 0664, pull_show, pull_store); +static DEVICE_ATTR(drv, 0664, drv_level_show, drv_level_store); +static DEVICE_ATTR(data, 0664, data_show, data_store); + +static struct attribute *gpio_sw_class_attrs[] = { + &dev_attr_cfg.attr, + &dev_attr_pull.attr, + &dev_attr_drv.attr, + &dev_attr_data.attr, + NULL +}; + +static const struct attribute_group gpio_sw_class_attr_group = { + .attrs = gpio_sw_class_attrs, }; static struct device_attribute easy_light_attr = @@ -370,10 +379,15 @@ gpio_sw_classdev_register(struct device *parent, gpio_sw_cdev->name); if (IS_ERR(gpio_sw_cdev->dev)) return PTR_ERR(gpio_sw_cdev->dev); + if (easy_light_used && strlen(pdata->link)) { if (sysfs_create_file(&gpio_sw_cdev->dev->kobj, &easy_light_attr.attr)) pr_err("gpio_sw: sysfs_create_file fail\n"); } + + if (sysfs_create_group(&gpio_sw_cdev->dev->kobj, &gpio_sw_class_attr_group)) + pr_err("gpio_sw: sysfs_create_file fail\n"); + down_write(&gpio_sw_list_lock); list_add_tail(&gpio_sw_cdev->node, &gpio_sw_list); up_write(&gpio_sw_list_lock); @@ -566,7 +580,7 @@ static struct platform_driver gpio_sw_driver = { }, }; -static void __exit gpio_sw_exit(void) +static void gpio_sw_exit(void) { int i, cnt; struct gpio_config config; @@ -624,7 +638,7 @@ static int sunxi_init_gpio_probe(struct platform_device *pdev) gpio_sw_class->suspend = gpio_sw_suspend; gpio_sw_class->resume = gpio_sw_resume; - gpio_sw_class->class_attrs = (struct class_attribute *)gpio_sw_class_attrs; + //gpio_sw_class->class_attrs = (struct class_attribute *)gpio_sw_class_attrs; if (of_property_read_u32(node, "easy_light_used", &easy_light_used)) { easy_light_used = 0; @@ -740,8 +754,14 @@ static int __init sunxi_gpio_init(void) return 0; } +static void __exit sunxi_gpio_exit(void) +{ + gpio_sw_exit(); + platform_driver_unregister(&sunxi_gpio_driver); +} + module_init(sunxi_gpio_init); -module_exit(gpio_sw_exit); +module_exit(sunxi_gpio_exit); MODULE_AUTHOR("yanjianbo"); MODULE_DESCRIPTION("SW GPIO USER driver"); diff --git a/lichee/linux-4.9/drivers/leds/Kconfig b/lichee/linux-4.9/drivers/leds/Kconfig old mode 100644 new mode 100755 index 7a628c6516..92452bd455 --- a/lichee/linux-4.9/drivers/leds/Kconfig +++ b/lichee/linux-4.9/drivers/leds/Kconfig @@ -604,6 +604,14 @@ config LEDS_IS31FL32XX LED controllers. They are I2C devices with multiple constant-current channels, each with independent 256-level PWM control. +config LEDS_SUNXI + tristate "LED Support for Sunxi" + depends on LEDS_CLASS + help + This option enables support for on-chip LED for Sunxi. If you + want to enable trigger function, you have to slect trigger option + below. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM diff --git a/lichee/linux-4.9/drivers/leds/Makefile b/lichee/linux-4.9/drivers/leds/Makefile old mode 100644 new mode 100755 index 3965070190..4fae3bd87c --- a/lichee/linux-4.9/drivers/leds/Makefile +++ b/lichee/linux-4.9/drivers/leds/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o +obj-$(CONFIG_LEDS_SUNXI) += leds-sunxi.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/lichee/linux-4.9/drivers/leds/leds-sunxi.c b/lichee/linux-4.9/drivers/leds/leds-sunxi.c new file mode 100755 index 0000000000..48956bc46f --- /dev/null +++ b/lichee/linux-4.9/drivers/leds/leds-sunxi.c @@ -0,0 +1,327 @@ +/* + ** leds-sunxi.c -- support led for sunxi + ** + ** Copyright (c) 2016 + ** Allwinner Technology Co., Ltd. + ** + ** This program is free software; you can redistribute it and/or modify + ** it under the terms of the GNU General Public License version 2 as + ** published by the Free Software Foundation. + ** + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +static struct gpio_led *gpio_leds; +static void *led_list_head; +static void *led_list_name; +static int led_num; + +struct gpio_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; + u8 can_sleep; + u8 active_low; + u8 blinking; + int (*platform_gpio_blink_set)(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off); +}; + +static void gpio_led_work(struct work_struct *work) +{ + struct gpio_led_data *led_dat = + container_of(work, struct gpio_led_data, work); + if (led_dat->blinking) { + led_dat->platform_gpio_blink_set(led_dat->gpio, + led_dat->new_level, + NULL, NULL); + led_dat->blinking = 0; + } else + gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level); +} + +static void gpio_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct gpio_led_data *led_dat = + container_of(led_cdev, struct gpio_led_data, cdev); + int level; + + if (value == LED_OFF) + level = 0; + else + level = 1; + + if (led_dat->active_low) + level = !level; + + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so + * let's just assume the worst. + */ + if (led_dat->can_sleep) { + led_dat->new_level = level; + schedule_work(&led_dat->work); + } else { + if (led_dat->blinking) { + led_dat->platform_gpio_blink_set(led_dat->gpio, level, + NULL, NULL); + led_dat->blinking = 0; + } else + gpio_set_value(led_dat->gpio, level); + } +} + +static int gpio_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct gpio_led_data *led_dat = + container_of(led_cdev, struct gpio_led_data, cdev); + + led_dat->blinking = 1; + return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK, + delay_on, delay_off); +} + +static int create_gpio_led(const struct gpio_led *template, + struct gpio_led_data *led_dat, struct device *parent, + int (*blink_set)(unsigned, int, + unsigned long *, unsigned long *)) +{ + int ret, state; + + pr_info("%s\n", __func__); + + led_dat->gpio = -1; + + /* skip leds that aren't available */ + if (!gpio_is_valid(template->gpio)) { + dev_err(parent, "Skipping unavailable LED gpio %d (%s)\n", + template->gpio, template->name); + return 0; + } + + ret = devm_gpio_request(parent, template->gpio, template->name); + if (ret < 0) { + pr_err("request LED gpio %d (%s) failed\n", template->gpio, template->name); + return ret; + } + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + led_dat->can_sleep = gpio_cansleep(template->gpio); + led_dat->active_low = template->active_low; + led_dat->blinking = 0; + + if (blink_set) { + led_dat->platform_gpio_blink_set = blink_set; + led_dat->cdev.blink_set = gpio_blink_set; + } + + led_dat->cdev.brightness_set = gpio_led_set; + + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) + state = !!gpio_get_value_cansleep(led_dat->gpio) + ^ led_dat->active_low; + else + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; + + if (!template->retain_state_suspended) + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); + if (ret < 0){ + pr_err("set LED gpio %d (%s) output(%d) failed\n", led_dat->gpio, led_dat->cdev.name, led_dat->active_low ^ state); + return ret; + } + + INIT_WORK(&led_dat->work, gpio_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + return ret; + + return 0; +} + +static void delete_gpio_led(struct gpio_led_data *led) +{ + if (!gpio_is_valid(led->gpio)) + return; + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); +} + +struct gpio_leds_priv { + int num_leds; + struct gpio_led_data leds[]; +}; + +static inline int sizeof_gpio_leds_priv(int num_leds) +{ + return sizeof(struct gpio_leds_priv) + + (sizeof(struct gpio_led_data) * num_leds); +} + +static int gpio_led_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct gpio_leds_priv *priv; + char (*led_name)[5]; + int i, ret = -1; + u32 val; + u32 led_used = 0; + char trigger_name[32]; + struct gpio_config config; + const char *trigger_str = NULL; + + pr_info("%s start\n", __func__); + + ret = of_property_read_u32(np, "led_used", &val); + if (ret < 0) { + pr_err("%s: led_used get err.\n", __func__); + return ret; + } + led_used = val; + + if (1 != led_used) { + pr_err("%s: led is unused.\n", __func__); + return ret; + } + + ret = of_property_read_u32(np, "led_num", &val); + if (ret < 0) { + pr_err("%s: led_num get err.\n", __func__); + return ret; + } + + led_num = val; + + led_list_head = kzalloc(led_num * sizeof(struct gpio_led), GFP_KERNEL); + if (led_list_head == NULL) { + pr_err("%s: kzalloc led list head failed.\n", __func__); + return -ENOMEM; + } + + gpio_leds = (struct gpio_led *) led_list_head; + + led_list_name = kzalloc(led_num * sizeof(char[5]), GFP_KERNEL); + if (led_list_name == NULL) { + pr_err("%s: kzalloc led list name failed.\n", __func__); + return -ENOMEM; + } + + led_name = (char (*)[5]) led_list_name; + + for (i = 0; i < led_num; i++) { + sprintf(led_name[i], "%s%d", "led", i+1); + sprintf(trigger_name, "%s%s", led_name[i], "_trigger"); + + ret = of_get_named_gpio_flags(np, + led_name[i], 0, (enum of_gpio_flags *)&config); + if (ret < 0) { + pr_err("%s: device_tree_get_item %s err\n", + __func__, led_name[i]); + return ret; + } + + gpio_leds[i].gpio = config.gpio; + + pr_info("%s gpio number is %d\n", led_name[i], gpio_leds[i].gpio); + + ret = of_property_read_string(np, trigger_name, &trigger_str); + if (ret < 0) { + pr_err("%s: device_tree_get_item %s err\n", + __func__, trigger_name); + return ret; + } + + gpio_leds[i].default_trigger = trigger_str; + + pr_info("%s led trigger name is %s\n", trigger_name, + gpio_leds[i].default_trigger); + + gpio_leds[i].name = led_name[i]; + gpio_leds[i].active_low = 0; + gpio_leds[i].default_state = LEDS_GPIO_DEFSTATE_OFF; + } + + if (gpio_leds && led_num) { + priv = devm_kzalloc(&pdev->dev, + sizeof_gpio_leds_priv(led_num), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->num_leds = led_num; + + for (i = 0; i < priv->num_leds; i++) { + ret = create_gpio_led(&gpio_leds[i], + &priv->leds[i], + &pdev->dev, 0); + if (ret < 0) { + /* On failure: unwind the led creations */ + for (i = i - 1; i >= 0; i--) + delete_gpio_led(&priv->leds[i]); + //kfree(priv); + return ret; + } + } + } + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int gpio_led_remove(struct platform_device *pdev) +{ + struct gpio_leds_priv *priv = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < priv->num_leds; i++) + delete_gpio_led(&priv->leds[i]); + + platform_set_drvdata(pdev, NULL); + kfree(priv); + + return 0; +} + +static const struct of_device_id sunxi_leds_ids[] = { + { .compatible = "allwinner,sunxi-leds" }, + { /* Sentinel */ } +}; + +static struct platform_driver sunxi_leds_driver = { + .probe = gpio_led_probe, + .remove = gpio_led_remove, + .driver = { + .name = "sunxi-leds", + .owner = THIS_MODULE, + .of_match_table = sunxi_leds_ids, + }, + +}; + +module_platform_driver(sunxi_leds_driver); + +MODULE_DESCRIPTION("LED driver for tina 2.0"); +MODULE_LICENSE("GPL"); diff --git a/lichee/tools/pack/chips/sun50iw1p1/configs/m64/sys_config_linux-4.9.fex b/lichee/tools/pack/chips/sun50iw1p1/configs/m64/sys_config_linux-4.9.fex index 6dfaba6c3d..8d966bbc4f 100755 --- a/lichee/tools/pack/chips/sun50iw1p1/configs/m64/sys_config_linux-4.9.fex +++ b/lichee/tools/pack/chips/sun50iw1p1/configs/m64/sys_config_linux-4.9.fex @@ -111,12 +111,27 @@ uart_debug_tx = port:PB8<4><1> uart_debug_rx = port:PB9<4><1> [jtag_para] -jtag_enable = 1 +jtag_enable = 0 jtag_ms = port:PB0<4> jtag_ck = port:PB1<4> jtag_do = port:PB2<4> jtag_di = port:PB3<4> +;---------------------------------------------------------------------------------- +; +;LED support +;---------------------------------------------------------------------------------- +[led_para] +compatible = "allwinner,sunxi-leds" +led_used = 1 +led_num = 3 +led1 = port:PD24<1> +led1_trigger = "default-on" +led2 = port:PE14<1> +led2_trigger = "heartbeat" +led3 = port:PE15<1> +led3_trigger = "default-on" + [clock] pll4 = 300 pll6 = 600 @@ -1242,6 +1257,43 @@ ir_protocol_used = 0 ir_power_key_code = 116 ir_addr_code = 0x17c612 + +;------------------------------------------------------------------------------- +;userspace gpio interface for android +;---------------------------------------------------------------------------------- +[gpio_para] +compatible = "allwinner,sunxi-init-gpio" +gpio_used = 1 +gpio_num = 28 +gpio_pin_1 = port:PH3<1><0> +gpio_pin_2 = port:PH2<1><0> +gpio_pin_3 = port:PH6<1><0> +gpio_pin_4 = port:PH7<1><0> +gpio_pin_5 = port:PH10<1><0> +gpio_pin_6 = port:PH11<1><0> +gpio_pin_7 = port:PD2<1><0> +gpio_pin_8 = port:PD3<1><0> +gpio_pin_9 = port:PD1<1><0> +gpio_pin_10 = port:PC4<1><0> +gpio_pin_11 = port:PC7<1><0> +gpio_pin_12 = port:PB5<1><0> +gpio_pin_13 = port:PB4<1><0> +gpio_pin_14 = port:PB6<1><0> +gpio_pin_15 = port:PL12<1><0> +gpio_pin_16 = port:PB0<1><0> +gpio_pin_17 = port:PB1<1><0> +gpio_pin_18 = port:PB3<1><0> +gpio_pin_19 = port:PB2<1><0> +gpio_pin_20 = port:PD4<1><0> +gpio_pin_21 = port:PC0<1><0> +gpio_pin_22 = port:PD0<1><0> +gpio_pin_23 = port:PC2<1><0> +gpio_pin_24 = port:PC3<1><0> +gpio_pin_25 = port:PB7<1><0> +gpio_pin_26 = port:PL9<1><0> +gpio_pin_27 = port:PL7<1><0> +gpio_pin_28 = port:PL8<1><0> + ;-------------------------------------------------------------------------------------------------------- ;compatible ---pmu0 name, support:axp803 ;used ---0:not used,1:used diff --git a/lichee/tools/pack/chips/sun50iw1p1/configs/m64_hdmi/sys_config_linux-4.9.fex b/lichee/tools/pack/chips/sun50iw1p1/configs/m64_hdmi/sys_config_linux-4.9.fex index 6b631b2685..042c3ae268 100755 --- a/lichee/tools/pack/chips/sun50iw1p1/configs/m64_hdmi/sys_config_linux-4.9.fex +++ b/lichee/tools/pack/chips/sun50iw1p1/configs/m64_hdmi/sys_config_linux-4.9.fex @@ -111,12 +111,27 @@ uart_debug_tx = port:PB8<4><1> uart_debug_rx = port:PB9<4><1> [jtag_para] -jtag_enable = 1 +jtag_enable = 0 jtag_ms = port:PB0<4> jtag_ck = port:PB1<4> jtag_do = port:PB2<4> jtag_di = port:PB3<4> +;---------------------------------------------------------------------------------- +; +;LED support +;---------------------------------------------------------------------------------- +[led_para] +compatible = "allwinner,sunxi-leds" +led_used = 1 +led_num = 3 +led1 = port:PD24<1> +led1_trigger = "default-on" +led2 = port:PE14<1> +led2_trigger = "heartbeat" +led3 = port:PE15<1> +led3_trigger = "default-on" + [clock] pll4 = 300 pll6 = 600 @@ -550,7 +565,7 @@ lcd_dclk_freq = 30 lcd_pwm_used = 1 lcd_pwm_ch = 16 lcd_pwm_freq = 50000 -lcd_bl_0_percent = 50 +lcd_bl_0_percent = 10 lcd_pwm_pol = 1 lcd_pwm_max_limit = 255 lcd_hbp = 88 @@ -1242,6 +1257,43 @@ ir_protocol_used = 0 ir_power_key_code = 116 ir_addr_code = 0x17c612 + +;------------------------------------------------------------------------------- +;userspace gpio interface for android +;---------------------------------------------------------------------------------- +[gpio_para] +compatible = "allwinner,sunxi-init-gpio" +gpio_used = 1 +gpio_num = 28 +gpio_pin_1 = port:PH3<1><0> +gpio_pin_2 = port:PH2<1><0> +gpio_pin_3 = port:PH6<1><0> +gpio_pin_4 = port:PH7<1><0> +gpio_pin_5 = port:PH10<1><0> +gpio_pin_6 = port:PH11<1><0> +gpio_pin_7 = port:PD2<1><0> +gpio_pin_8 = port:PD3<1><0> +gpio_pin_9 = port:PD1<1><0> +gpio_pin_10 = port:PC4<1><0> +gpio_pin_11 = port:PC7<1><0> +gpio_pin_12 = port:PB5<1><0> +gpio_pin_13 = port:PB4<1><0> +gpio_pin_14 = port:PB6<1><0> +gpio_pin_15 = port:PL12<1><0> +gpio_pin_16 = port:PB0<1><0> +gpio_pin_17 = port:PB1<1><0> +gpio_pin_18 = port:PB3<1><0> +gpio_pin_19 = port:PB2<1><0> +gpio_pin_20 = port:PD4<1><0> +gpio_pin_21 = port:PC0<1><0> +gpio_pin_22 = port:PD0<1><0> +gpio_pin_23 = port:PC2<1><0> +gpio_pin_24 = port:PC3<1><0> +gpio_pin_25 = port:PB7<1><0> +gpio_pin_26 = port:PL9<1><0> +gpio_pin_27 = port:PL7<1><0> +gpio_pin_28 = port:PL8<1><0> + ;-------------------------------------------------------------------------------------------------------- ;compatible ---pmu0 name, support:axp803 ;used ---0:not used,1:used