android: add tulip-m64-hdmi target

android/device/softwinner/tulip-m64-hdmi/configs/bluetooth/bdroid_buildcfg.h

@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _BDROID_BUILDCFG_H
+#define _BDROID_BUILDCFG_H
+
+#ifdef BLUETOOTH_RTK
+
+/*
+#define BTM_DEF_LOCAL_NAME   "Realtek Bluetooth"
+ */
+
+// SERVICE_CLASS:0x1A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer)
+// MAJOR CLASS: COMPUTER
+// MINOR CLASS: TABLET
+#define BTA_DM_COD {0x1A, 0x01, 0x1C}
+
+#define BTA_GATT_DEBUG FALSE
+
+#define PORT_RX_BUF_LOW_WM  (10)
+#define PORT_RX_BUF_HIGH_WM  (40)
+#define PORT_RX_BUF_CRITICAL_WM  (45)
+#define PORT_CREDIT_RX_MAX   (48)
+
+#define HCI_MAX_SIMUL_CMDS (1)
+#define BTM_BLE_SCAN_SLOW_INT_1 (144)
+#define BTM_BLE_SCAN_SLOW_WIN_1 (16)
+#define BTM_MAX_VSE_CALLBACKS  (6)
+
+#define BTM_BLE_CONN_INT_MIN_DEF     0x06
+#define BTM_BLE_CONN_INT_MAX_DEF     0x0C
+#define BTM_BLE_CONN_TIMEOUT_DEF     200
+
+#define BTIF_HF_SERVICES (BTA_HSP_SERVICE_MASK)
+#define BTIF_HF_SERVICE_NAMES  { BTIF_HSAG_SERVICE_NAME, NULL }
+
+#define BTA_DISABLE_DELAY 1000 /* in milliseconds */
+#define BTA_HOST_INTERLEAVE_SEARCH FALSE
+
+/*heartbeat log define*/
+#define BTPOLL_DBG FALSE
+/*hci log define*/
+#define BTHC_DBG FALSE
+/*avdtp log define*/
+//#define AVDT_DEBUG TRUE
+/*BT log verbose*/
+#define BT_TRACE_VERBOSE TRUE
+/* BT trace messages*/
+#define BT_USE_TRACES  TRUE
+/*A2DP SINK ENABLE*/
+#define BTA_AV_SINK_INCLUDED TRUE
+#define BLE_LOCAL_PRIVACY_ENABLED FALSE
+#define USE_AUDIO_TRACK TRUE
+/*BT lib vendor log*/
+//#define BTVND_DBG TRUE
+/*page timeout */
+#define BTA_DM_PAGE_TIMEOUT 8192
+#define BTM_LOCAL_IO_CAPS_BLE   BTM_IO_CAP_KBDISP
+#define BT_HCI_DEVICE_NODE_MAX_LEN 512
+
+#define KERNEL_MISSING_CLOCK_BOOTTIME_ALARM TRUE
+
+#else
+#define BTM_DEF_LOCAL_NAME "BPI-M64"
+#define BTA_DM_COD {0x20, BTM_COD_MAJOR_AUDIO, BTM_COD_MINOR_SET_TOP_BOX}
+
+#define BLE_VND_INCLUDED TRUE
+
+// Turn off BLE_PRIVACY_SPT.  Remote reconnect fails on
+// often if this is enabled.
+#define BLE_PRIVACY_SPT FALSE
+
+// Force connection interval to 13.75ms
+#define BTM_BLE_CONN_INT_MIN_DEF 11 /* 13.75ms = 11 * 1.25 */
+#define BTM_BLE_CONN_INT_MAX_DEF BTM_BLE_CONN_INT_MIN_DEF
+
+// Allow better battery life
+#define BTM_BLE_CONN_SLAVE_LATENCY_DEF 24
+
+// Detect disconnects faster
+#define BTM_BLE_CONN_TIMEOUT_DEF 300
+
+// Increase background scanning to reduce reconnect time
+#define BTM_BLE_SCAN_SLOW_INT_1    110    /* 68.75 ms   = 110 *0.625 */
+#define BTM_BLE_SCAN_SLOW_WIN_1    8      /* 5 ms = 8 *0.625 */
+
+// Disable HFP
+#define BTIF_HF_SERVICES (BTA_HSP_SERVICE_MASK)
+#define BTIF_HF_SERVICE_NAMES  { BTIF_HSAG_SERVICE_NAME, NULL }
+
+// Disable compiling code in Bluedroid for profiles we don't support
+#define BTA_PAN_INCLUDED FALSE
+#define BNEP_INCLUDED FALSE
+#define AVDT_INCLUDED FALSE
+#define PAN_INCLUDED FALSE
+#define AVCT_INCLUDED FALSE
+
+/* We will support a remote +  4 game controllers.  To be able to
+ * allocate sufficient bandwidth for all devices we will restrict the
+ * Game Controllers to a sniff interval of 13.75ms.
+ */
+#define BTA_DM_PM_SNIFF4_MAX     22
+#define BTA_DM_PM_SNIFF4_MIN     22
+#define BTA_DM_PM_SNIFF4_ATTEMPT 1
+#define BTA_DM_PM_SNIFF4_TIMEOUT 0
+
+#define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF4
+#define BTA_DM_PM_HH_OPEN_DELAY 0
+
+#define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF4
+#define BTA_DM_PM_HH_ACTIVE_DELAY 0
+
+#define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF4
+#define BTA_DM_PM_HH_IDLE_DELAY 0
+
+// Change I/O capabilities to output only so pairing uses passkey instead of pin
+#define BTM_LOCAL_IO_CAPS BTM_IO_CAP_OUT
+#endif
+#endif